-
✅ ADE RD3-006 Green Dot Reflex Sight | Doctor Footprint | Motion Activated | Designed in Oregon
Includes Picatinny Mount & CR2032 Battery
? Key Features
-
Doctor Footprint – Compatible with handgun optic plates/slides cut for Doctor / Vortex Venom / Burris Fastfire.
-
Also includes Picatinny mount for rifles, shotguns, or pistols with rails.
-
3 MOA Green Dot with 5 brightness levels for versatile daylight and low-light use.
-
Motion Activated System – Auto-sleeps after 5 minutes of inactivity and instantly powers back on with any movement or vibration, restoring the last brightness setting.
-
Windage & Elevation Adjustable, with lockable turrets to maintain zero under recoil.
-
Unlimited eye relief for fast target acquisition.
-
Powered by 1x CR2032 lithium battery (included).
?️ Built to Last
-
Since 2014, this sight has been continuously improved for better durability and recoil resistance.
-
Recent updates include enhanced front switch, battery housing, and upgraded hardware.
-
Designed in Oregon, USA.
⚠️ Installation Note
While it can be installed by experienced users, we strongly recommend a professional gunsmith. Improper torque can cause loose screws, loss of zero, damage to your firearm or optic, and even personal injury.
? Have Astigmatism?
If your dot looks like a starburst, smear, or double-dot, you likely have astigmatism (very common and often undiagnosed).
✅ Simple test: take a picture of the dot with your phone. If it shows a clean round dot in the photo, your eyes are the cause.
? What’s Included
✔ ADE RD3-006 green dot sight
✔ Picatinny mounting base (pre-installed)
✔ CR2032 battery
✔ Adjustment tool & screws
✔ Instruction manual -
----------------------------------------------------------------------------------------------------
Additional information's about ADE red dots
ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-013 Bertrillium fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. RD3-015 Zantitium, RD3-028 Ares fit plate(does NOT fit slide due to larger size) that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint.
Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore ADE RD3-006, 009, 012, 013 do NOT fit the aftermarket slide with CURVED vortex venom optic cut. ADE red dots with Doctor footprints only fit squared optic cuts that accept standard Doctor Footprints.
ADE RD3-018 Spike, RD3-021 Nuwa(and RD3-021Pro NUWA Pro) RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.
ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie, RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
When you first receive the ADE red dot. It might have a picatinny mounting plate pre-assembled(might be packaged separately in the retail package, depending on the ADE model). Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately.
107 Reviews Hide Reviews Show Reviews
-
Good Optic
This Optic was a direct mount on a Doctor cut PSA Dagger Compact. After direct mounting the site using the rubber dampener then the optic on top, laser sighting it in and locking down the windage and elevation screws I'm happy to report 200 rounds later of 124 grn 9mm grind hard ammo the site works perfect. Never lost zero or malfunctioned, and It does co-witness with iron sites. Very surprised for the price this thing even worked and the brightness levels are perfect. I highly suggest using the supplied rubber mount and be sure to tighten down the windage and elevation screws after sighting it in. Just ordered another one for my other PSA Dagger Compact Doctor cut build. Cheers.
-
victory .22 works great
put this on my 22 pistol and so far it has held up to me shooting, never comes loose. the one thing I would say is that the dot isn't that crisp of a dot. but you are getting what you paid for so be happy with it lol or go spend the 200$
-
the price optic is great
I mounted it to my 9mm glock and fit model 19 as described. I bore sighted optic, ok no problems. Haven't had tme to range test yet. This red dot optic looks and operates just like the more expensive red dots.I love the price, but the only draw back is the warranty coverage compared to the more expensive optics.
-
GET VALUE FOR YOUR MONEY
GET VALUE FOR YOUR MONEY ITS ALTERNATIVE TO HIGH IN RED DOT LIKE RMR ETC. AND ITS BETTER TO THOSE CLONE RMR , THIS IS GOOD BRAND AND TUR TO THERE VALUE AND PRODUCT WHAT YOU PAY WHAT YOU GET. i USE THIS TO MY TAURUS TX22 IM PRESS THE QUALITY..!!!
-
So far its seems like a good deal. Easy setup and easy adjustments
I installed the red dot ( green dot) a few days ago. Got it setup at home the best I could. Took it the range, made one adjustment and fired 100 rds through it with no problems. It works as good as any red dot that I have ever used. Its really hard to beat for the price.
-
the price optic is great
I mounted it to my 9mm glock and fit model 19 as described. I bore sighted optic, ok no problems. Haven't had tme to range test yet. This red dot optic looks and operates just like the more expensive red dots.I love the price, but the only draw back is the warranty coverage compared to the more expensive optics.
-
GET VALUE FOR YOUR MONEY
GET VALUE FOR YOUR MONEY ITS ALTERNATIVE TO HIGH IN RED DOT LIKE RMR ETC. AND ITS BETTER TO THOSE CLONE RMR , THIS IS GOOD BRAND AND TUR TO THERE VALUE AND PRODUCT WHAT YOU PAY WHAT YOU GET. i USE THIS TO MY TAURUS TX22 IM PRESS THE QUALITY..!!!
-
So far its seems like a good deal. Easy setup and easy adjustments
I installed the red dot ( green dot) a few days ago. Got it setup at home the best I could. Took it the range, made one adjustment and fired 100 rds through it with no problems. It works as good as any red dot that I have ever used. Its really hard to beat for the price.
-
Love it.
Love it. Shipping was fast. Clarity is good. Came with and extra battery.
-
Best sub $50 3MOA Green Dot Reflex Ever!!!
Went out on limb, being a Sightmark, Vortex and EOTech fan, and gambled on a sub $50 optic because I needed it stat! Was very pleased with this reflex sight...Fit right, Looked right, Adjusted right and Shot right. The best thing about it was that they provide a quality rubber cover, unlike al the hard plastic ones others have that break easily.
-
ADE green dot
What more can I say but you can't beat the price, durability,and function. This great little sight is just what I needed for my Canik tp9sfx. I own mostly Sig products and seems to be just as good as they are. Thanks for producing a quality sight at a affordable price.
-
Excellent product for price!
Bought it with doubts due to price difference from most entry level sights. Works great, had dialed in within 6 shots and have not had to adjust since. The only downside is the dot is dim on almost all but max brightness settings. However, I am leaving as a 5 star because I live in Las Vegas and it is extremely bright all day. Have not shot at night, but assume it would be much easier to see on lower settings.
