-
✅ ADE RD3-006 Green Dot Reflex Sight | Doctor Footprint | Motion Activated | Designed in Oregon
Includes Picatinny Mount & CR2032 Battery
? Key Features
-
Doctor Footprint – Compatible with handgun optic plates/slides cut for Doctor / Vortex Venom / Burris Fastfire.
-
Also includes Picatinny mount for rifles, shotguns, or pistols with rails.
-
3 MOA Green Dot with 5 brightness levels for versatile daylight and low-light use.
-
Motion Activated System – Auto-sleeps after 5 minutes of inactivity and instantly powers back on with any movement or vibration, restoring the last brightness setting.
-
Windage & Elevation Adjustable, with lockable turrets to maintain zero under recoil.
-
Unlimited eye relief for fast target acquisition.
-
Powered by 1x CR2032 lithium battery (included).
?️ Built to Last
-
Since 2014, this sight has been continuously improved for better durability and recoil resistance.
-
Recent updates include enhanced front switch, battery housing, and upgraded hardware.
-
Designed in Oregon, USA.
⚠️ Installation Note
While it can be installed by experienced users, we strongly recommend a professional gunsmith. Improper torque can cause loose screws, loss of zero, damage to your firearm or optic, and even personal injury.
? Have Astigmatism?
If your dot looks like a starburst, smear, or double-dot, you likely have astigmatism (very common and often undiagnosed).
✅ Simple test: take a picture of the dot with your phone. If it shows a clean round dot in the photo, your eyes are the cause.
? What’s Included
✔ ADE RD3-006 green dot sight
✔ Picatinny mounting base (pre-installed)
✔ CR2032 battery
✔ Adjustment tool & screws
✔ Instruction manual -
----------------------------------------------------------------------------------------------------
Additional information's about ADE red dots
ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-013 Bertrillium fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. RD3-015 Zantitium, RD3-028 Ares fit plate(does NOT fit slide due to larger size) that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint.
Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore ADE RD3-006, 009, 012, 013 do NOT fit the aftermarket slide with CURVED vortex venom optic cut. ADE red dots with Doctor footprints only fit squared optic cuts that accept standard Doctor Footprints.
ADE RD3-018 Spike, RD3-021 Nuwa(and RD3-021Pro NUWA Pro) RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.
ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie, RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
When you first receive the ADE red dot. It might have a picatinny mounting plate pre-assembled(might be packaged separately in the retail package, depending on the ADE model). Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately.
107 Reviews Hide Reviews Show Reviews
-
Improves My Colt Defender Sights
My Co2 Colt Defender has somewhat loosy gun sights so said Green Dot Sight is needed to remedy such a flawed design aspect. The dot sight has 04 brightness settings(the latter two only matters) which greatly improves the overall precision shooting experience. The installation of this item (like with most add-ons)was a minor chore to do. All in all,I'm quite pleased with the final outcome.
-
Works like a charm
Easy install and actually holds zero pretty well on my tp9sfx. Only complaint would be the power button, it's kind of in an awkward spot on the very front of the optic.
-
F×$%!@& AWESOME
Its awesome! Not water proof but itll definitely hold zero, I left it out and my toddlers used it to play catch the optic and some wallball AND IT HELD ZERO. After a box it still held on the 9mm. With no parallax or star shaped dot I will definitely recommend this company. I might trade it in for the waterproof RD3-009 but I think I prefer the green dot over red. Either way you'll be shooting with both eyes wide open w/o problems. Just buy it dude it's worth the money
-
Read before you buy a more expensive sight.
Not a bad sight. Works as well as my $300 vortex red dot. Makes me wonder why I ever spent that much in the first place. You can buy a more permanent base made for your gun for around $20, then mount this sight to it. So for less than$75 you get the same result as a $300 plus red dot sight. You can sight it in with the quick release mount it comes with then take it off for storage. When you want to use it again Just snap it back on and it will still hit within 3" of center without adjusting. Unless your trying to hit a squirrel in the head that's plenty close enough.
-
Long term
Fits nice battery last a long time
-
Make sure this fits your needs
Make sure this fits your needs
-
Green Dot
Haven't got a chance to use it but it seems to look pretty good time will tell
-
Fantastic Optic
I waited awhile to make a review on this optic. It acceded my expectations but a big margin. I bought this to put on a 9mm SAR k2P. Holds zero, the dot is easy to see and despite me grabbing it to rack the slide the finish and glass hasn't been effected. If your looking for a budget friendly micro dot i suggest you try this one out.
-
Excellent
Excellent product
-
Excellant at this price
Just received my ADE Advanced Optics RD3-006A green dot mini reflex and have mounted it on my Glock 19 gen 3. I received it quickly, on time for me anyway and in excellent packaging with, to my surprise, tools even though I wouldn’t need them. Someone, however, may. Very good idea. The dot is nice and bright and the controls, mounts and glass are all commensurate with a much pricier option. The dot loses its edge with the higher intensity settings. The green dot is sharp, bright but at the highest setting you get a halo starburst effect. No matter, I will probably not use that setting; there are a few other settings that are effective. This was very easy to install you want to try out a red dot before going to a more high-end piece, this will work and to Zero In. Best purchase I have made for the price and outstanding for what you get.
-
Not cheap looking, arrived quickly, works perfect. Great price!
It got here quickly, was packaged good, has tools, cover, dial in scale tool, actual instructions, cleaning cloth. Sight is not cheap looking. Made from solid aluminum, green dot is clear and sharp, highest brightness setting is very bright and does have a slight "desert sun at noon" starburst. This doesn't bother me because I wont ever use it where I am. Wife likes it there for her use. I used It on a 22 pistol for competition 1" Disc, Steel tree, shooting. Went right on, adjusted easily, stayed on true the whole time for about 250 shots. Friends with higher end optics Liked it too. I do understand Chinese production and sometimes a bad one does get by, just like here. Always a gamble with online purchasing for sure. Friend got a broken U.S. made sight right out of the box for $500+ I'll get back after next time out with an update.
-
Green dot
Installed very easily green dot very nice and easy to see ,it’s my first green dot,very easy to use would highly recommend.
