Ade Advanced Optics RD3-006B Python Green Dot Micro Mini Reflex Sight For Handgun

• ✅ ADE RD3-006 Green Dot Reflex Sight | Doctor Footprint | Motion Activated | Designed in Oregon

  Includes Picatinny Mount & CR2032 Battery

  ---

  ? Key Features

  • Doctor Footprint – Compatible with handgun optic plates/slides cut for Doctor / Vortex Venom / Burris Fastfire.

  • Also includes Picatinny mount for rifles, shotguns, or pistols with rails.

  • 3 MOA Green Dot with 5 brightness levels for versatile daylight and low-light use.

  • Motion Activated System – Auto-sleeps after 5 minutes of inactivity and instantly powers back on with any movement or vibration, restoring the last brightness setting.

  • Windage & Elevation Adjustable, with lockable turrets to maintain zero under recoil.

  • Unlimited eye relief for fast target acquisition.

  • Powered by 1x CR2032 lithium battery (included).

  ---

  ?️ Built to Last

  • Since 2014, this sight has been continuously improved for better durability and recoil resistance.

  • Recent updates include enhanced front switch, battery housing, and upgraded hardware.

  • Designed in Oregon, USA.

  ---

  ⚠️ Installation Note

  While it can be installed by experienced users, we strongly recommend a professional gunsmith. Improper torque can cause loose screws, loss of zero, damage to your firearm or optic, and even personal injury.

  ---

  ? Have Astigmatism?

  If your dot looks like a starburst, smear, or double-dot, you likely have astigmatism (very common and often undiagnosed).
  ✅ Simple test: take a picture of the dot with your phone. If it shows a clean round dot in the photo, your eyes are the cause.

  ---

  ? What’s Included

  ✔ ADE RD3-006 green dot sight
  ✔ Picatinny mounting base (pre-installed)
  ✔ CR2032 battery
  ✔ Adjustment tool & screws
  ✔ Instruction manual

----------------------------------------------------------------------------------------------------

Additional information's about ADE red dots

ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-013 Bertrillium fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. RD3-015 Zantitium, RD3-028 Ares fit plate(does NOT fit slide due to larger size) that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint.

Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore ADE RD3-006, 009, 012, 013 do NOT fit the aftermarket slide with CURVED vortex venom optic cut. ADE red dots with Doctor footprints only fit squared optic cuts that accept standard Doctor Footprints.

ADE RD3-018 Spike, RD3-021 Nuwa(and RD3-021Pro NUWA Pro) RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.

ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint

ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie, RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint

When you first receive the ADE red dot. It might have a picatinny mounting plate pre-assembled(might be packaged separately in the retail package, depending on the ADE model). Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately.