ADE is introducing all new APOLLO PRO(RD3-030PRO). This ADE APOLO PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint.
Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.
The APOLLO PRO is designed for ultimate convenience and performance. It remains powered on at all times and features an advanced auto-dimming sensor that automatically adjusts the dot brightness to match changing ambient light conditions. Whether you're in bright sunlight or low-light environments, the APOLLO PRO ensures optimal visibility by dynamically increasing or decreasing brightness as needed.
ADE Apollo red dot sight is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws very minimum powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
Designed to fit
Bul Armory SAS II lightweight 3.25 Comp
Canik Elite TP9 SC
Canik METE SFX
Canik METE SFT
CZ P-09C Nocturne
FNH Reflex MRD
Sccy cpx-2
Sig P320 Xten (Using Sig provided plate marked for Leopold Deltapoint Pro optic footprint)
Sig P365X/P365XL/P365XL SPECTRE COMP
Sig P322
Sig P365-380(make sure your model is exactly called "P365-380", not P360 or P380)
Sig P365 X Macro
Sig P365-XMACRO TACOPS
Sig P365 California Compliant (Sig released it in late 2023/early 2024)
Ruger Max-9
Ruger Model 43949 Mark IV 22/45 lite
Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS)
Springfield Hellcat OSP
Springfield XDS MOD 2 OSP
Springfield Elite 3.8” Compact OSP 9mm
S&W Shield 2.0 Optics Ready
S&W M&P9 shield plus Optics Ready
S&W 9mm Equalizer
S&W MP9 EZ
S&W MP 5.7
S&W M&P shield plus performance center
Walther PPS M2 Optics Ready
Girsan MC1911SC Ultimate
Girsan Witness2311
Mossberg MC2SC/MC2c
Mossberg 940 pro turkey
Mossberg 940 JM PRO Optic Ready
Taurus GX4 Toro
Taurus TX22 Compact
Taurus 865 Toro
Taurus 605 Toro
Tisas PX-5.7 OR
Tisas 1911 Duty Double Stack 9mm
Masada SLIM
Rock Island STK-100
Plus any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.
Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames(0.61oz), (Length)1.6" x (Width)1" x (Height).9". The objective lens is 22mmx16m/0.87"x0.63"
Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
----------------------------
ADE RD3-006B, RD3-009, RD3-012, RD3-013 and RD3-028 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
ADE RD3-018 Spike, RD3-021 Nuwa(and pro) and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
ADE RD3-019 Stingray RD3-020 Raptor, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
ADE RD3-021 NUWAcc fit optic cut/optic plate/ that is compatible with Trijicon RMRcc footprint.
-------------------------------------
Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry.
----------------------------
Below are additional footprint about ADE footprints.
ADE, RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-013 Bertrillium fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. RD3-015 Zantitium, RD3-028 Ares fit plate(does NOT fit slide due to larger size) that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore ADE RD3-006, 009, 012, 013 do NOT fit the aftermarket slide with CURVED vortex venom optic cut. ADE red dots with Doctor footprints only fit squared optic cuts that accept standard Doctor Footprints.
ADE RD3-018 Spike, RD3-021 Nuwa and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
ADE RD3-021c NUWAcc fits optic cut/optic plate/ that is compatible with Trijicon RMRcc footprint
ADE RD3-019 Stingray RD3-020 Raptor, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
60 Reviews Hide Reviews Show Reviews
-
So far so good
This mounted easily (5 minutes) on my canik sc elite. Window is nice and clear and dot is very visible. Zeroed at 25 ft and waiting to go to the range. Will update if needed after 100 rounds. Only complaint is that the cover doesn't fit snug but that's just minor 6 months update: I cannot be more pleased. I have yet to install a new battery and the site stays true. I am about to order another for my 1911.
-
Works great, not water proof/resistant!
This is my second experience with ADE optics and it, so far, is much better than my first! The sight looks and feels well made. The dot is crisp and clear as is the optics glass. The switches work well and are not easily bumped. Shake awake also works quickly and the optic comes on immediately on picking up the firearm. Zeroing was accomplished in the typical fashion. Take a few shots from a stabilized position, in my case a pistol rest, aim dead center, fire a round, reposition the pistol, aim dead center and adjust the sight to the first impact hole. Was rinse and repeat until the pistol hits where the optic is aimed. That said the optic was perfectly sighted in three shots and retained zero through all three 20rnd magazines we fired that day. The ONLY issue I have is that this optic in NOT water proof or resistant, which is disappointing as even most budget optics are!
-
Works great
This sight was simple to instal and uses the same base as my sig Romeo. Setup was simple and sighting it in was fast and easy. I would recommend
-
Features of higher end red dot
I am impressed with the overall size and yet still is solar rechargeable. Always on and ready to go. Auto brightness. The reticle has crisp edges and the quality of the optics is good.
-
Great site
This is really nice and accurate. Easy to use and looks amazing looking down the sight to see the reticle. Pinpoint accuracy.
-
Very Small...Perfect for small pistols!
This is perfect for smaller pistols, because it is so small and lightweight. It is easy to attach and has a clear, bright sight picture for good accuracy. I am very impressed with it for the price and will get another if/when I get another pistol of compact or sub-compact size.
-
Good budget red dot for my 22/45
I put this in a low RMS mount and put it on my 22/45. It was easy to zero with the included micro screwdriver and the dot was bright enough to pick up easily when outdoors. Thus far, it has held up to rimfire use.
-
Very high quality
This sight unfortunately doesn’t fit, however the bright red dot is very cool. Like many, the reticle can be adjusted, but the blue tent really sets this off. The solar recharge is another unique feature about this. It’s easy to use and of great quality.
-
Excellent red dot site
Good construction and installed firmly onto my airsoft pistol. The red dot functions as expected. The buttons are not super large so you have to look at what you are pressing. Brightness is excellent in all but the most direct sunlight. It is still visible at high noon but takes a bit of practice to train your eyes to see it. Instructions are adequate.
-
Really is compact..
Nice little optic with a clear and distinct red dot. It's light weight and easily was installed. The viewing area is also a bit small but the optic is easy to view through and has nice clarity. The red dot was also very easy to sight in. Overall nice little optic...?
-
Works great!
Really happy with the optic. Just remember that solar power is not guarantee power. So if you keep in a safe that option isnt going to do you any good.
-
Great features and holds up well
Solar rechargeable? 50hrs battery? Always on? Auto brightness? All for sub $200? Fantastic value! The glass looks great, and the dot seems good. I've always avoided "cheap" optics because the gun blogs say you get what you pay for, but in this case, I got way more! I set this up on my S&W M&P AR22 at a 45-degree angle off my scope. Works like a charm for close targets. It seems to be holding zero!
