Ade Advanced Optics 2025 Huracan Shake Awake RD3-006A Green Dot Mini Reflex Sight For Handgun

$64.99
(76 reviews) Write a Review
SKU:
RD3-006A1
Weight:
3.00 Ounces
Shipping:
Free Shipping
buywithprime:
active
 
   Ade Advanced Optics Huracan RD3-006A1 Green Dot          
 
 
Starting in June 2024, we have made significant updates:
The rear locking screw have been removed, and we have added self-locking and Motion Awake Technology for ADE RD3-006A1
 
 Can also be used with a long range rifle scope for that perfect Backup System
 
The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
 
 
1Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
 
Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
 
Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
 
Features: 
Large Field of View Holographic Laser Reflex New Design for use in bright daylight 5 Levels Green Dot; 
On/Off Switch Parallax Corrected 
Built-in 21mm Weaver Mount 
Unlimited Eye Relief 
Long Battery Life up to three months on all the time. 
 
Specifications: 
Model: RD3-006A 
Field of View: 19 yards at 100 yards 
Weight(net): 2 oz 
Length: 48mm (1.9 inches) 
Width: 25mm 3
 MOA DOT 
Magnification: 1.0 x 
Sight window: 22mmx25mm
 
 
 
 
 
 
 
 

ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint

 

ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint

 

ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint

 

 

ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint

76 Reviews Hide Reviews Show Reviews

  • 5
    No average

    Posted by Daniel Johnston on 31st Aug 2021

    I found these sights simply by happenstance. I find them to be of superior quality and materials. Sight adjustments are easy and dot can be brightness adjusted. Working with my weapon daily it’s put thru the belt ringer. I think definitely comparable to high end sights but budget friendly.

  • 5
    GREEN DOT

    Posted by Shawn on 9th Oct 2020

    This green dot is really great and does what it's supposed to do for my Smith and Wesson MP 40

  • 4
    ADE Huracan RD3-006A Green

    Posted by Eric Hester on 27th Apr 2020

    I received my sight and it was packaged very well, the directions were good and the sight was easy to setup after I changed the battery out. The sight was put on a 20 ga. shotgun and it held up fine after 6 shots of full power 20 ga turkey loads. The reason I'm giving 4 stars instead of 5 so far is the supplied battery was dead which was aggravating but luckily I had another one on hand. I don't think the battery needs to be installed in the sight since the directions are so clear on how to install the battery. I turned the off and on several times to make sure the sight back to the last setting. The sight performed as well as I expected. The green dot was clear once I took it outside during the sight in process.

  • 5
    Works on canik tp9sfx

    Posted by Spade on 26th Aug 2018

    I had to file down the front plastic power button housing all the way to the rubber button (voiding warranty). But this fits my canik with the canik provided #1 plate and screws! I bore sighted with Lazer (red on green) and shot about 30 rounds today. Very impressed. Also I slammed and shook the gun around alot to see if this thing would die. It's solid. For $39... It gets 5 stars!