Ade Advanced Optics RD3-012 Delta Red Dot Micro Mini Reflex Sight For Handgun - 6MOA

This is a great Red Dot for new Red Dot owners. Don’t spend high dollars for an RMR or DP Pro if you’re just getting started with red dot shooting. Try this one first! It works just as good as those mentioned. Those that are saying it comes with a big thick base, just take the base off and it will mount flush onto your pistol Sight plate. This has a very low profile! Works perfectly on my Walther PPQ Match Q5! Very well built! For the price, I’m very impressed with what I got!

If you think because of the price these are not good red dots you're slowly mistaken I don't know about any of the negative reviews but as my I have 5 of these I've used them on multiple kinds of handguns and even have 1 on a AR-15 And no problems with any of them they hold zero and as long as you use a little blue Loctite their plates and their red dot screws won't loosen up??

Currently have it installed on a S&W Victory 22, sight is nice and lightweight. Easy to zero and holds it very well, though it’s not getting beat too hard with just a .22lr so your mileage may vary. Would I put this on my AR15 pistol? Probably not. A 22 or 9mm carbine? Absolutely. My only minor complaint is that the screw head for the picatinny mount sticks out just a little too far and looks goofy, but it’s a minor nitpick that in no way effects how the sight actually functions. Sight seems to be well built for the cost

Best optic at ant price point. Super high quality!

I was a bit skeptical when buying the item but for the cost I thought I'd give it a try. I took it to the range and fired over 500 rounds from my Glock 17. After zeroing the weapon, the optic maintained its "Zero" the entire without any lag in performance. I normally fire Sig Sauer sight on my pistol but this is right up there. I was able to place rounds within a 1-inch group at 20 yards away. I recommend this sight to anyone looking to try out red dot pistol optics. The one complaint I had was that there are no instructions for zeroing. I had to go on YouTube for a tutorial which was a little frustraiting.

have not tried live fire yet. Looks great

I put it on a Canik TP9 combat elite. I'm just breaking in the Canik and my old eyes couldn't do better than 4'' groups at 25yds. After putting on the ADE reflex sight I was shooting 2'' groups at 25yds while sighting it in. After 5 three shot groups I had it within 1/2'' high and 1'' right. I know this because the next 15 shots were amazing. I aimed 1'' to the left and emptied the magazine! 12 shots hit in 1''group 1/2'' high and dead center, the other three within 2''. I've never done that before, 15 shots! TWO INCH GROUP, 25YRDS. I know its only the first day, I will post another review in a couple months after I put at lest a thousand rds. through my Canik TP9 combat elite/ ADE/Tactical Reflex Dot Sight.

Shipped quickly and installed very easily on my 9mm cz clone. Dead on right out the box at 30 yards with a lazer boresight, and after almost 500 rounds still keeping 2.5" groupings. The only downside was the alignment pin holes on the rear of the sight didnt fit the mount i purchased (fronts fit perfect) other than that its been perfect. ive been comparing it to the Vortex and fastfire that my buddies shoot and other than this sight not having an auto-off feature, i think i got the better deal. Definitely buying a second and third for my other two firearms *edit* Now almost 1500 rounds downrange with the optic and it's still holding true. Swapped it to a friends AR15 with the included rail mount(which I did not need on my pistol) and the sight was 1" low at 100 without ever being adjusted.

this is the ade rd3-012 red dot sight. I am using it on a 12 gauge shot gun. I installed a rail on the gun to mount the red dot on, mount comes already on the red dot. It sighted in easily and precise. I have to wear glasses to see up close, out to about 4 ft. but for some reason that i don't know i see this red dot perfect and sharp without the glasses. I don't know if it will be that way for anybody else but for me it was amazing. I've shot slugs, buckshot and number 4 rabbit loads so far [ 36 rounds total ] and the sight has handled it. I don't know how long a battery will last yet but you have to remember to turn it off when your done it does not shut it's self off. I can't say if it will hold up long term but it looks well made and is aluminum not plastic and i am going to buy another one for my lever action 3030.

Worth the price works great

I had a Leupold Delta Point w/7.5 moa. It kept shutting down so I had to send it back for repairs. I wanted something to tide me over until the Delta Point came back so I bought this with the 6 moa and put it on. That was 4 months ago. I still haven't switched back even though my Leupold is back. This thing holds zero with no problem. The dot is bright, doesn't star and is easy to see. The glass is easy to see thru without any distortion. I probably put 600 -1000 rounds per month thru the gun (Walther PPQ Tac 4) at the range. Have not had to do anything to the sight after zeroing it in other than replacing the battery once. However, for the money I could replace the battery monthly and be well ahead of the game. The only (and it's very slight) drawback is zeroing it in. With the lock down screws having to be tightened every time then loosened every time you make a change it gets tiresome. However, once it's zeroed it stays zeroed so it's not that big of a deal. If you are just thinking about getting a RMR/Red Dot this is a great way to get started without having to break the bank. I'm going to order another one for my wife's gun.

Buying the ADE RD3-012 Red Dot was ano brainer. Mounted on my Taurus G3C T.O.R.O, is exactly what I needed and completed my EDC pistol. You hear stories of people spending up to 1,000.00 to have a great CCW. Well eith the addition of my ADE Red Dot I have less 600.00 into a great CCW package. The ADE ADE RD3-012, is super bright, easy to mount and very accurate right out of the box. Comes with everything including a mount for picaninny rails for carbine. I put a lot of research into this and the ADE RD3-012 Delta cane our #1.