This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install
This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide.
This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE: Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.
This picatinny rail plate also have two built-in screw hole for red dot with Shield RMS/RMSc footprint and holosun 407k/507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny plate(sold separately).
Matt Black aircraft lightweight alluminum, weight 1oz.
Length 1.85in/46mm
Width .79inch/20mm -perfectly fits and hide inside the grove of red dot provided picatinny mounting plate
- This mount fits all generation Glocks:
Glock 17
Glock 17L
Glock 19
Glock 19x
Glock 20
Glock 21
Glock 22
Glock 23
Glock 24
Glock 26
Glock 27
Glock 29
Glock 30
Glock 30 SF
Glock 31
Glock 32
Glock 33
Glock 34
Glock 35
Glock 36 (Our mount is wider than the slide, but it will still work)
Glock 37
Glock 38
Glock 39
Glock 41
Glock 42 (Our mount is wider than the slide, but it will still work)
Glock 43 (Our mount is wider than the slide, but it will still work)
Glock 43x (Our mount is wider than the slide, but it will still work)
Glock 44
Glock 45
Glock 46
Glock 48 (Our mount is wider than the slide, but it will still work)
Canik TP9SF - Canik TP9 SA
Bersa BP9CC
Tactical Solutions .22lr Conversion
Advantage Arms .22lr Conversion
Does not fit Glock MOS models.
Glock 17 Gen 4 MOS
Glock 19 Gen 4 MOS
Glock 34 Gen 4 MOS
Glock 35 Gen 4 MOS
Glock 40 Gen 4 MOS
Glock 41 Gen 4 MOS
Glock 22 Gen 5 MOS
Glock 23 Gen 5 MOS
Glock 34 Gen 5 MOS
Glock 45 MOS
Glock 43x MOS
Glock 48 MOS - Does not fit ANY/ALL Glock MOS models.
- Does not fit ANY/ALL Glock Aftermarket slides that are already cut for optics.
102 Reviews Hide Reviews Show Reviews
-
Adds the missing rail
The Picatinny Rail Mount Plate for my Glock 19 was easy to install, and provides a firm foundation for optics. The main features for me has been its compatibility with all railed red dots. Mounting has been seamless. I also appreciate the attention to detail in its design. The fit is snug, which means no unnecessary movement or wobble when in use, ensuring that accuracy remains uncompromised. The plate itself is lightweight and doesn’t add any noticeable heft to the firearm, making it ideal for both professional marksmen and hobbyists. This Picatinny Rail Mount Plate has certainly enhanced my shooting experience and comes highly recommended for those who refuse to compromise on quality and compatibility. A solid 5-star product!
-
THE Better Mousetrap
Good quality. Excellent idea combining pic rail with a rmsc mount. Vey satisfied with product. BTW came with the needed screws. My only negative was the shipping. Waiting a full week for shipping PLUS a $5 fee seems extreme in this market.
-
Good fit
I followed some instructions I found online to install it. Tap the rear sight out to the right then tap this one in. It fits perfectly. Excited to get the red dot to attach. The center cut makes it work as an iron sight until then. Need to paint the back white too.
-
Hunting
Thanks worked great
-
Nice
Worked on my Taurus g3 perfectly, recommended
-
Excellent product
This product meets expectations. Very pleased with it.
-
Nice addition to my Taurus G3
Went on easily by using my vice. However they weren't kidding when they said "Don't over tighten". This thing can and will bend. Also, I recommend some thread locker. If you don't use it this thing can and will come loose. Overall though, it fit my Taurus G3 perfectly and allowed me to mount my red dot without issues.
-
Nice Option
This is a very handy and useful set up. It’s made very well and precise. It mounts super easy and snug. This is a great price for what you get. The coating looks really good as well.
-
Good option over machining
Well this seems to be the best option over buying a new slide or having your existing slide machined to accept a red dot. As stated by another reviewer it sits higher than if your slide was machined but that’s the nature of the beast, tradeoffs. Obviously, the ability to secure the rail with zero movement is critical to keep proper zero on the sight in. This device seems to get the job done. A cheap alternative overall to expensive machining. Works on Glocks.
-
Great way to add optics
Got this to add an optic to my 19. It was easy to install and holds tight without any movement. My biggest issue is that it isn't sitting perfectly flush with the top of the slide. I don't get any movement but the chance is there and I'm sure it is going to collect dirt and dust more than it would if it was flush. I plan on pulling it off and doing a bit of machining to see if I can get a flush fit.
-
An interesting take..
A 'dovetail mount' is the easiest and cheapest way to mount an RMR on a non-rmr equipped slide. This mount takes that a step further, adding a picitinny rail, so your choice of optics is increased. To top it off, it also addresses the main shortcoming of those dovetail mounts, namely, the inability to use the sights when the RMR is not present. To combat this, the mount has a machined slot right through the middle, that will stand in for a rear sight. Great improvement on a fairly standard idea.
-
Is what it says - just not good for my preferences
I like the red dot on my G19 so much I wanted to add to my Gen 4 Glock 26. The installation using a sight pusher is normal and secure but mounting direct to dovetail is too flimsy to keep zero and while the picatinny rail is nice and universal- it also adds height and bulk. Maybe not big deal on larger frame pistol - but on the 26 it was too much for me. None of this is fault of vendor and the mount is exactly what it says - just not good for me.
