Ade RD3-006B GREEN Dot Reflex Sight + Optic Mounting Plate for All GLOCK (Non-MOS) Standard models Canik TP9SF TP9SA and Taurus GX4, G3C & G3 with factory steel sights pistol

The sight looks amazing; but the glock mount that's suppose to fit didn't so i had to buy another mount that does. It was only 30 which is nothing but still lame i gotta wait another 3 to 4 days.

Everything works great

It seems to fit on G44. Will update how it holds up later.

Product was well designed and built but was not right for my gun.

Build is good

It mounted onto my Glock 22, so that’s all matters to me. Have not tried it out yet.

Easy to install. The different settings for the brightness are handy. I didn’t have a sight pusher but a hammer and a punch worked fine. Doesn’t feel cheap at all. Fit my Glock 21 perfect

Bought just as a temporary sight but haven’t changed it yet (2months) very clean and slick design easy to install bright has 5 modes and all are bright worth the price

This is a great optic for the money, I would definitely buy this again for a different gun. This optic is better for me than my Vortex Venom on my CZ 97b. The ADE green dot is extremely visible, the on/off button is in the center of the optic, above the barrel, not on the side above the slide serrations like the Vortex Venom. This means it’s really unlikely you’ll turn it on or off unintentionally, no matter how you carry it. This came zeroed perfectly, I matched it with a 9mm bore laser and I didn’t have to touch the elevation or windage screws. I have one minor caveat with this ADE green dot, but it’s tiny and I still give this 5/5 stars. I bought this to stick on my Glock 43x (non-MOS) it comes with a metal baseplate which screws into a mounting insert which sits under that, replacing the rear sight. My only issue is the metal insert which goes into the sight slot was far too large to fit without sanding it. The rear sight can be removed with a sight pusher, but the mounting insert is too low profile to install with the pusher (because the base plate has to screw into it from above and sit flat). So I had to install the insert with hammer and punch, but it was too large for the slot. It went about 25% of the way in and got stuck completely, I had to hammer it back out the opposite way. The insert is kind of triangle shaped with a flat top, I had to sand it on the 2 top two diagonal faces until it was bare metal. I just laid a piece of medium grit sand paper down and rubbed it manually, took like two minutes. You do have to be careful that you don’t take too much off or the base plate with optic will slide out. I had sandpaper, it took a couple of minutes, it fits perfect now, no big deal. So what does the Vortex Venom have for $220 that this doesn’t at $68.99? Not a lot to me. The Vortex and the ADE optic both have adjustable dot brightness settings. The battery cover of the Vortex Venom is on top of the optic, which is the only superior design element it has over the ADE optic. On the ADE you have to use an allen key on two screw which connect to the base plate, and remove the whole optic in order to access the battery (you dont have to remove the base plate or the sight insert.) To me this isn’t a deal breaker, dot optics use so little power and it’s really easy to take the 2 screws out of the base plate. Only other difference between the Vortex Venom and the ADE I’m aware of is the on off button. On the Venom the button is on the side where it can too easily be hit by accident. It’s still easily accessible on the ADE (front face, above barrel) but way less easy to hit by accident. Overall, I give this optic a 5/5 for my needs. The ADE has everything I need, and is literally 1/3rd the price of a Venom. A minor amount of sanding isn’t a big deal for me personally so it’s a nonissue.

for now i just give it four stars rating i wait tell i go to the range see how its function

Good price. Free shipping. Easy to install. No sale tax.

Fast reply, delivered on time