- Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Holosun 407K/507K, EPS,EPS carry, Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Micro Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Scope base shims Tolerance +/-.005 Taper 1.0 degree
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
-
What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the "defective" red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
-
Position the thicker side toward the end to lower the dot.
Position the thicker side toward the front to raise the dot.
13 Reviews Hide Reviews Show Reviews
-
5.0 out of 5 stars Great Product
Worked great. Going to the range tomorrow. Bore sighted it and it's perfect.
-
Glock 45 Solved
Perfect. Enabled me to sight in the optic perfectly.
-
Perfect fit. Well made.
The shim worked perfectly. I would highly recommend them.
-
Just what I needed
Quick delivery, perfect fit. I did not initially have enough elevation for my Leupold Deltapoint Pro but this product took care of that problem.
-
Perfect for my red dot! Brought it into range for sighting in…
The 1% wedge worked perfect as not to max out my elevation adjustment on the Holosun 407k x2
-
Works as it should
Bought this to elevate my optic on my staccato cs. Easy to install and works perfect
-
This Worked Great
Not much of a reviewer but this shim worked great on a Hex Wasp. Although the Wasp was working fine, I had it completely maxed out on elevation and was still shooting low with my RD right on top of my front sight. Now, shooting on target with RD where I wanted it to be originally. Had to cut down the shim a bit to fit the cutout on the slide but all was easy to do and holes in shim matched perfect with hole patten in the slide. Super simple.
-
Works Well
Not the most fun to spend money on a shim, but when you need one it's nice to have a good one on the shelf and available. This fit well and is easy to install. Much faster than trying to make your own precision shim.
-
Good fit, quality
This 1 degree wedge took care of my situation and the fit between the sight and mount is very good, almost unnoticeable. Sight used is the Holosun 507 comp
-
Works
I had to file the holes and trim the length but definitely help me out. I actually used it in the reverse position.
-
Adds Height for the Holosun 407K and others
Needed a shim to properly mount a Holosun 407K X2 on a FN502. The FN502 needs a shim to be able to tighten the screws so that the red dot won't come lose. Worked well. The shim is thicker on one end and thinner on the other end so pay attention to how it is oriented. The footprint for the Holosun 407K is the same for the 507K and their EPS models. I don't know all the models of red dots that fit that footprint.
-
Perfect
Works great on my 407k
