This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install
This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide.
This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE: Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.
This picatinny rail plate also have two built-in screw hole for red dot with Shield RMS/RMSc footprint and holosun 407k/507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny plate(sold separately).
Matt Black aircraft lightweight alluminum, weight 1oz.
Length 1.85in/46mm
Width .79inch/20mm -perfectly fits and hide inside the grove of red dot provided picatinny mounting plate
- This mount fits all generation Glocks:
Glock 17
Glock 17L
Glock 19
Glock 19x
Glock 20
Glock 21
Glock 22
Glock 23
Glock 24
Glock 26
Glock 27
Glock 29
Glock 30
Glock 30 SF
Glock 31
Glock 32
Glock 33
Glock 34
Glock 35
Glock 36 (Our mount is wider than the slide, but it will still work)
Glock 37
Glock 38
Glock 39
Glock 41
Glock 42 (Our mount is wider than the slide, but it will still work)
Glock 43 (Our mount is wider than the slide, but it will still work)
Glock 43x (Our mount is wider than the slide, but it will still work)
Glock 44
Glock 45
Glock 46
Glock 48 (Our mount is wider than the slide, but it will still work)
Canik TP9SF - Canik TP9 SA
Bersa BP9CC
Tactical Solutions .22lr Conversion
Advantage Arms .22lr Conversion
Does not fit Glock MOS models.
Glock 17 Gen 4 MOS
Glock 19 Gen 4 MOS
Glock 34 Gen 4 MOS
Glock 35 Gen 4 MOS
Glock 40 Gen 4 MOS
Glock 41 Gen 4 MOS
Glock 22 Gen 5 MOS
Glock 23 Gen 5 MOS
Glock 34 Gen 5 MOS
Glock 45 MOS
Glock 43x MOS
Glock 48 MOS - Does not fit ANY/ALL Glock MOS models.
- Does not fit ANY/ALL Glock Aftermarket slides that are already cut for optics.
102 Reviews Hide Reviews Show Reviews
-
Fits my Glock 22
This fits and does what it says it should. I haven't mounted a reddot yet but I don't foresee any issues there. I don't see how a lightweight red dot would bend the mount as another reviewer indicated. The recoil is pretty reasonable and the mount seems sturdy.
-
Works excellently as ironsights, but I have doubts about being able to mount a red dot
I attached this to a Taurus G3 handgun, but really anything with Glock compatible sights can use it. The system itself is sleek and well designed. It's easy to install and the rail itself doubles as a Glock compatible rear sight. I very much prefer an installation like this, than use a sight pusher tool to install a more typical glock compatible sight. Even good sight pusher tools I get nervous with, and unexperienced individuals could potentially scrape the slides of their guns. It also holds up well to 9mm handgun recoil as well, I'm getting perfectly normal groups at 10 and 25 yards. The one thing I am going to do is question the material choice. I put a red dot on top, and there was an ever so slight amount of flex in the plate in the direction of the barrel, not laterally. Some red dots can get heavy, and if you have a 2 screw picatinny mounting solution and are forced to move the optic slightly up forward, given enough rounds I could see the mount breaking under pressure. However, as of now, it works perfectly as a rear sight.
-
Perfect for my rare usecase
I have a very strange use-case for this. I needed a Docter-to-Picatinny rail adapter to fit onto my NCStar Barrel and Magazine Tube clamp on my Remington 870. It just so happens this Glock adapter had the same 14mm separated mounting holes as my NCStar clamp. 5 star just for that.
-
Works great.
Allows you to attach an optic to your pistol with ease.
-
Perfect fit for my G3C!
This was easy to install if you have a sight press. Slides in nicely but not a loose fit. Pretty universal with several different mounting configurations for various platforms. Beautiful black anodized finish. Picatinny/weaver mount is nice fit.
-
Did not fit replica
I tried this out on my replica and found out that it did not fit. Otherwise, it looks quality built. I've been looking for a solution like this for sometime. Unfortunately, this was not to be. It would have helped if it was closer to the wedge shape of the rear sight.
-
Works on my Zev slide
Works well on my g19 zev slide. Was able to put a lil romeo on there :)
-
Red dot rail mount
Rail mount is very well made, machined well, fit easily on my G19, comes with all you need, extra screws and two allen wrenches to fit your needs and red dot make, fits solid.
-
Perfect fit
Product was a perfect fit and made installing red dot easy. Feels durable and after 500 rounds at the range hasn't loosened at all. Looks just as good as feels. Product came on time and well packed.
-
Works perfect
This mounting plate works great. I have to on my work pew pew, a Glock 19. Easy to install and one you install it, it doesn't losen up after putting a few hundred rounds through it. Good price and fast delivery. I definitely recommend this mounting plate.
-
Perfect
The machining is perfect. Not a rough edge or mark that doesn’t belong. Fits perfectly and does exactly what it’s meant to. I’ll update after it’s gone through some punishment.
-
Yes
Works extremely well. Mounted on my Taurus. Easily attached
